End-to-End EPC Capability
Engineering to Energisation: EPC Without the Gaps
Most EPC engagements are stitched together from multiple vendors, each with their own tolerances, timelines, and accountability gaps. Skkytop is built differently. As a vertically integrated manufacturer with an in-house engineering team, we carry the project from feasibility modelling through structural design, procurement, construction, and commissioning under one roof.
How We Build Your Project
Every Skkytop EPC engagement follows a disciplined sequence designed to eliminate ambiguity at each stage before it becomes a cost or schedule problem downstream.
Engineering and Energy Simulation
We begin with a full site assessment and energy yield simulation calibrated to your location, load profile, and generation targets. Shading analysis, irradiance modelling, and degradation projections are built into the simulation before a single procurement decision is made. The output is a bankable energy model, not an optimistic estimate.
Site-Specific Layout and Structural Design
Our in-house engineering team produces site-specific layout plans and structural drawings tailored to your ground conditions, rooftop loading limits, or water body characteristics. ACE Series modules are rated for snow loads up to 5400 Pa and wind loads up to 2400 Pa, and our structural specifications are designed to match those ratings in the field, not just on paper.
Procurement of Modules and Ecosystem Components
Skkytop's vertically integrated manufacturing means ACE Series modules move from our facility to your site without the lead-time volatility that comes from third-party sourcing. Ecosystem components — inverters, battery storage, mounting structures, cabling, and smart monitoring units — are procured through a coordinated supply chain we manage directly.
Construction and Commissioning
Installation is executed against the engineering drawings produced at stage two, so the system built in the field matches the system modelled at the outset. Commissioning includes system verification, performance benchmarking, and handover documentation. Our 30-year linear performance warranty on ACE Series modules gives owners and lenders a clear long-term performance baseline from day one.
In-house energy simulation: bankable yield models before procurement begins
EPC Capability Across Every Project Type
Skkytop engineers and delivers projects across the full range of solar deployment formats, serving industries, institutions, MSMEs, utility-scale developers, government schemes, and off-grid communities.
Ground-Mount Utility-Scale
Floating Solar
Rooftop (Commercial, Industrial, and Institutional)
Rooftop projects for factories, warehouses, office campuses, and institutions require precise structural load analysis and module configurations sized to available roof area and actual consumption patterns. We design to the roof, not to a standard template, with ACE Series modules available in flexible wattage configurations to fit irregular and constrained rooftop layouts.
Ground-Mount Utility-Scale
For utility-scale solar farm developers and government scheme operators, we deliver ground-mount EPC with energy yield simulations, optimised string design, and ALMM-certified ACE Series modules that meet PM-KUSUM and other central and state government procurement compliance requirements. Our planned 1.8 GW capacity by 2026 supports large-volume pipelines without supply interruption.
Floating Solar
Floating installations place specific demands on structural integrity, module corrosion resistance, and cabling ingress protection. ACE Series modules carry IEC 61701 salt mist and IEC 62716 ammonia resistance certification. Our in-house engineering team designs the pontoon layout, mooring, and cable management to the specific surface area, depth, and wave characteristics of each water body.
Hybrid Systems
Hybrid projects combine solar generation with battery storage to deliver reliable power across variable irradiance periods. Skkytop manages the full hybrid architecture as a single-source EPC engagement: generation array design, battery system integration, inverter selection, and smart monitoring configuration. This avoids coordination failures that occur when generation and storage are specified and installed by separate parties.
Off-Grid and Microgrid
For communities, rural infrastructure, and industrial facilities beyond the grid, Skkytop designs and builds off-grid and microgrid systems sized to real load profiles. Our in-house energy simulation establishes accurate daily and seasonal demand curves, so generation array and storage capacity are matched to actual consumption. ACE MAX modules with zero LID maintain output stability over multi-year off-grid deployment cycles.
Single-Source Ecosystem Supply
One of the most common failure points in EPC delivery is fragmented procurement: modules from one supplier, inverters from another, mounting from a third, with each vendor optimising for their own component rather than the system. Skkytop supplies the complete solar ecosystem under one procurement relationship, so every component is specified to work together and every delivery timeline is managed by the same team responsible for your engineering design.
Inverters
Inverter specification is integrated into our energy simulation process at stage one. Inverter sizing, MPPT configuration, and string architecture are optimised against the actual module parameters of the ACE Series — including its positive power tolerance and current binning characteristics — rather than estimated against a generic datasheet.
Battery Storage
Battery storage is sized against the energy simulation output and actual consumption profile established during the engineering phase. For hybrid and off-grid projects, storage capacity, charge-discharge cycling parameters, and thermal management requirements are specified as part of the same design process that produces the generation array layout.
Mounting Structures
Mounting structures are designed and specified by our in-house structural engineering team to the same wind and snow load ratings that govern our module certifications: up to 2400 Pa wind and 5400 Pa snow. Ground-mount, rooftop, and floating pontoon configurations are all within scope, with structural drawings produced site-specifically.
Cabling
DC and AC cabling specifications are produced as part of the system design, with cable sizing, routing, and ingress protection ratings matched to the installation environment. For floating and coastal projects, we specify to the corrosion and moisture exposure standards required by those conditions, consistent with the IEC 61701 and IEC 62716 certifications our modules carry.
Smart Monitoring and Control Units
Smart monitoring and control units are integrated at the design stage, not added as an afterthought, so owners and operators have accurate generation data, fault detection, and performance benchmarking from the first day of operation. This supports both long-term performance tracking against our 30-year warranty baseline and ongoing O&M decision-making.
Why EPC Companies and Developers Choose Skkytop
The right EPC partner is not simply the one with the lowest module price. It is the one that removes risk from your project schedule, your performance commitments, and your compliance obligations.
Vertically Integrated Manufacturing Reduces Supply-Chain Risk
Long lead times and unpredictable component availability have derailed more EPC project schedules than almost any other factor. Because Skkytop manufactures ACE Series modules at its own facility — with planned capacity scaling to 1.8 GW by 2026 — module supply is not subject to the allocation volatility and minimum-order fragmentation that affects third-party procurement.
In-House Engineering Team
Our engineering work is not subcontracted to a design firm engaged per project. Skkytop's in-house team handles energy simulation, structural design, layout planning, and system architecture as an integrated capability. The engineers who model your project are the same team whose specifications govern procurement and construction.
ALMM-Certified Modules for Government Scheme Eligibility
Projects under PM-KUSUM and other government procurement programmes require ALMM-certified modules. Skkytop's ACE Series carries ALMM certification alongside BIS and ISO compliance, so projects procuring through Skkytop are not at risk of disqualification on certification grounds during tender evaluation or post-award inspection.
Founded on Decades of Power Generation and EPC Experience
Skkytop's founding team brings decades of experience across power generation and EPC project delivery. The engineering discipline built into our manufacturing process, our testing protocols, and our project delivery methodology reflects that background. EPC competence is part of how the company was originally conceived.
Module Quality That Holds Up in the Field
A 30-year linear performance warranty means nothing if the modules fail in ways warranty claims cannot recover. Skkytop's warranty claim rate is under 0.07%, supported by an on-site NABL-accredited testing lab, pre and post EL testing for crack detection, and flash testing to verify power output before dispatch.
Discuss Your EPC Project
Whether you are at feasibility stage or ready to move to detailed design, Skkytop's engineering team can begin with the specifics of your site, your load requirements, and your project timeline. Contact us to start the conversation.
Start the Conversation
Share your project requirements and our EPC engineering team will respond with a detailed assessment. No generic estimates — we work from your site data.
Location
Western India, near major seaports